The advantages of mcsa
Headlines on mcsa
CCIE Voice Home lab with Dynamips/VMware
Mon, 07 Apr 2008 12:29:42 +0000
This is an attempt to simulate a decent CCIE Voice home lab on a single PC (with oodles of memory and a bleeding edge CPU).
When using PIM Sparse in NBMA environment like Frame Relay you need to make sure you enter the ip pim nbma command to disable the split horizon rule that traffic coming into the interface is not going out that same interface.
The IP pim nbma is working only for Sparse Mode Group
Candidate RP need to be able to communicate only with the mapping agent and the Routers in the Domain need to be able to communicate with the Mapping agent so from that we can understand that we need to watch our Route to the Mapping Agent.
Ok I think I will end it here for now, I hope this was good info.
Disable resume from MGCP shared line FXS port
Thu, 20 Jul 2006 00:51:44 +0000
This parameter determines if you can resume a call from hold on a MGCP FXS shared line.
Default value is true
RAM Upgrade for Sony Vaio VGC-RB64G Desktop
Sun, 01 Jun 2008 19:23:39 GMT
I am running windows xp media center sp2. I have been receiving Stop: 0X0000008E errors on an intermittent basis on my desktop. I ran windows memory test and Memtest86. Both found many errors. I pulled the old cards, cleaned inside the box and re-inserted the cards but still have the same...
Once I learnt more and more about mcsa, I fostered a desire of writing on mcsa. Now that my desire has been fulfilled, I hope your desire for its information too has been fulfilled.
#
Featured mcsa Items
ccie preparation
ccie preparation
ccie qos
ccie security | ccie security boot camp | ccie security bootcamp
1 Comments:
Thanks.
Post a Comment
<< Home